Organizations Who Bank On Us
Cable Trays, are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrication and finishing. Cable Trays are designed by taking care of cable loads and practical site problems. Wherever possible all fittings are made of state-of-the-art single piece construction.
Standards:
IEC 61537:2007
BS EN 61537:2007
NEMA VE 1 – 2009
NEMA VE 2 – 2006
NEC (ANSI / NFPA 70)
Types Overview and Components:
AMI cable trays and accessories from AMI are manufactured in compliance with BS EN 61537:2007/BS EN 10130/BS EN 10131/ BS EN 10051 and NEMA standards. And, as per cabling standards CENELEC EN 50173-1; EIA/ITA 568 A; ISO/IEC 11801-1:2017. We manufacture a wide range of products capable of providing the characteristics which respond to the proposed application, along with quality of assembly, speed of installation, and cost-saving cable trays.
Materials:
Pre-Galvanized, Hot-Dip Galvanized, Stainless Steel and Aluminium.
Material Thickness:
1.0 mm | 1.20 mm | 1.50 mm | 2.00 mm
Light Duty - LCT - 100
Thickness: 1.00 mm | Side Height: 50 mm | Length: 2440 mm / 3000 mm | Width: 50 – 1000 mm
Heavy Duty - HCT - 150
Thickness: 1.50 mm | Side Height: 50 ,75 and 100 mm | Length: 2440 mm / 3000 mm | Width: 50 – 1000 mm
Medium Duty - MCT - 120
Thickness: 1.20 mm | Side Height: 50 ,75 and 100 mm | Length: 2440 mm / 3000 mm | Width: 50 – 1000 mm
Very Heavy Duty - VCT - 200
Thickness: 2.00 mm | Side Height: 50 ,75 and 100 mm | Length: 2440 mm / 3000 mm | Width: 50 – 1000 mm